Mitsubishi Electric PAR-CT01MAU-SB Manual De Instalación página 19

Display setting menu
(1) Main display setting
[Button operation]
1 Move the cursor to "Full/Basic," and use the F3 or F4 button to select
the display mode "Full" or "Basic." (The factory setting is "Full.")
2 Move the cursor to "Icon explan." and use the F3 or F4 button to select
the display mode "Yes" or "No." (The factory setting is "Yes.")
Example: Full mode
(Icon explanation enabled)
Note: This setting is only for the Main display. In the Basic mode, icons that indicate control status on timer and
schedule settings will not appear on the display. When "No" is selected, the explanation of the setting
contents on the Main display will not appear.
(2) Remote controller display details setting
Make the settings for the remote-controller-related items as necessary.
Press the SELECT button to save the changes.
[1] Clock display
[Button operation]
1 Select "Clock" from the display details setting screen, and press the
F4 button (Change) to bring up the clock display setting screen.
2 Use the F1 through F4 buttons to select "Yes" (display) or "No" (non-
display) and its format for the Status display and the Main display.
3 Save the settings with the SELECT button. (The factory settings are
"Yes" (display) and "12 h" format.)
Clock display: Yes (Time is displayed on the Status display and the Main display.)
No (Time is not displayed on the Status display and the Main display.)
Display format: 24-hour format
12-hour format
AM/PM display (Effective when the display format is 12-hour): AM/PM before the time
Note: Time display format will also be reflected on the timer and schedule setting display. The time is displayed
as shown below.
12-hour format: AM12:00 ~ AM1:00 ~ PM12:00 ~ PM1:00 ~ PM11:59
24-hour format:
Example: Basic mode
(Icon explanation enabled)
0:00 ~ 1:00 ~ 12:00 ~
– 19 –
Example: Full mode
(Icon explanation disabled)
AM/PM after the time
13:00 ~ 23:59
Example: Basic mode
(Icon explanation disabled)