Fixing Outgoing Conductors; Fixing Conductors With Cable Terminal - M Type Bolt Clamp - WEG FSW 250 Manual De Instrucciones

www.weg.net

3. FIXING OUTGOING CONDUCTORS

3.1. FIXING CONDUCTORS WITH CABLE TERMINAL - M TYPE BOLT
CLAMP
Take off the cover (acc. to chapter 1.3);
g
Take off the shields for terminals (acc. to chapter 1.5);
g
Fix the conductors with M8 screw and torque 10 Nm (Figure 11);
g
The screw kit is compound by 12 M8 screw and 6 clips type S;
g
Break down appropriate elements of the shield for terminals (Figure 12,13) and/or
g
(Figure 14,15);
Mount the shields for terminals (acc. to chapter 1.6);
g
Mount the cover (acc.to chapter 1.4).
g
14 Instruction manual for mounting and service of fuse switch disconnectors
Figure 11
Figure 12
Figure 14
Figure 13
Figure 15