Manual Preset; Tuning In To A Preset Station - JVC KS-FX220 Manual De Instrucciones

Manual preset

You can preset up to 6 stations in each band (FM1,
FM2, FM3 and AM) manually.
Ex.: Storing an FM station of 88.3 MHz into the
preset number 1 of the FM1 band
1
Select the band (FM1 – 3, AM) you
want to store stations into (in this
example, FM1).
Each time you press the button, the FM
band changes as follows:
2
Tune in to a station of 88.3 MHz.
To tune in to stations
of higher frequencies
To tune in to stations
of lower frequencies
3
Press and hold the number button
(in this example, 1) for more than
2 seconds.
Preset number "P1" flashes for a while
8
FM1 FM2
FM3
AM
4
Repeat the above procedure to store
other stations into other preset
numbers.
Notes:
• A previously preset station is erased when a new station
is stored in the same preset number.
• Preset stations are erased when the power supply to
the memory circuit is interrupted (for example, during
battery replacement). If this occurs, preset the stations
again.

Tuning in to a preset station

You can easily tune in to a preset station.
Remember that you must store stations first. If you
have not stored them yet, see "Storing stations in
memory" on page 7 and 8.
1
Select the band (FM1 – 3, AM).
AM
2
Select the number (1 – 6) for the
preset station you want.
FM1 FM2
FM3