19. This machine gets hot when in use. To prevent burns, do not let bare skin come into contact with hot
surfaces.
20. Do not use a timer or a similar product to automatically switch on the heater. Always perform safety checks
before using the heater!
21. Close supervision is necessary when the product is used near children or incapacitated persons. Do not let
children use the appliance as a toy. This appliance is not suitable to be operated by children or persons who
have physical, sensory and/or mental limitations, or by persons who have no knowledge of, or experience
with, this appliance.
22. Keep the heater clean. Dust, dirt and/or a build up of deposits in the heater are a common cause of
overheating. Make sure these deposits are removed regularly.
23. Do not turn on the appliance if you have discovered damage to the appliance itself, the cord or the plug, if the
appliance is malfunctioning, if it has been dropped or if there are any other signs of a defect. Return the
complete product to the vendor or to a certified electrician for inspection and/or repair. Always ask for the
original parts.
24. Do not use attachments and/or accessories that have not been recommended or supplied by the
manufacturer.
25. The appliance (incl. cord and plug) may only be opened and/or repaired by properly authorised and qualified
persons.
26. Only use this heater for its intended purpose and as described in this instruction manual.
Not abiding by instructions 24, 25 and 26 may lead to damage, fire and/or personal injuries. A failure to adhere to
these rules also immediately nullifies the guarantee and vendor, importer and/or manufacturer do not take
responsibility for any of the consequences!
Description, Composition and Installation
Remove all packaging material and keep out of reach of children. After removing packaging, check the appliance
for damage or other signs that could indicate a fault/defect/malfunction. In case of doubt, do not use the
appliance, but contact your vendor for inspection or replacement.
Do not use the heater before it has been installed in accordance with the following instructions!
Attach the feet supplied to the underside of the heater (see picture):
Turn the heater upside down. Place a blanket (or something similar) under the
heater to prevent damage!
Slide the feet into place on the sides. This will ensure that the threaded holes will
align correctly.
Securely attach the feet to the heater using the self-tapping screws.
Return the heater to the upright position.
Make sure a working heater is always placed on a solid, flat and horizontal
surface. Deep-pile carpeting is unsuitable!
1 – air outlet grill heater
2 – handle
3 – thermostat dial
4 – pilot light (2x)
5 – mode selector dial (2x)
6 – base
7 – air intake grill (underside)
10