USE AND CARE
CAUTION
•
Do not use water on a grease fire. Personal
injury may result. If a grease fire develops,
turn knobs and LP cylinder off.
•
Do not leave grill unattended while preheating
or burning off food residue on HI. If grill has
not been regularly cleaned, a grease fire can
occur that may damage the product.
Ignitor Lighting the Griddle
1. Do not lean over grill while lighting.
2. In order for the igniter switch to work, please
make sure the battery is properly installed.
3. Turn OFF gas burner control valves.
4. Turn ON gas at LP cylinder.
5. To ignite, push and turn the IGNITION
BURNER knob to MAX.
6. Push and hold ELECTRONIC IGNITION
button until the IGNITION BURNER lights.
7. If ignition does NOT occur in 5 seconds, turn
the burner controls OFF, wait 5 minutes and
repeat the lighting procedure.
8. To ignite remaining burner, turn burner knob
Similar to the other knob.
9. Once each burner has ignited, turn knobs to
desired setting.
7