AQUALUX 104274 Manual De Instalación Y De Utilización página 18

USE
Preparing the pool (first use)
- Fill the pool with mains water. Avoid using well water which may have variable and unknown
characteristics. If you cannot use mains water, use the Aqualux BLUE MOON anti-scaling product that
will prevent any possible discomfort.
- Clean the pool, the skimmer and pump pre-filters and backwash the filter.
- If the sand in the filter is more than five years old, replace it or clean using a filter anti-scaling agent
from the BLUE MOON by Aqualux range.
- Adjust the pH to 7 – 7.4 using MOONMINUS by Aqualux PH – or MOONPLUS by Aqualux PH +.
- Add the MOONCAL by Aqualux anti-scaling agent.
-Proceed with shock treatment using MOONOXYCHOC by Aqualux liquid active oxygen (1 litre per
10m³).
Always observe the filtering times according to the temperature in order to save the disinfecting
products.
Always stop the pump before working on the filter valve and then switch it on again.
The chemical parameters of the water are maintained in the following ranges:
Acidity
Shock chlorine
Bromine
PHMB
12Hardness °F
The swimming water is balanced according to the balance of Taylor.
DIGITAL CONTROL PANEL SETTINGS
Settings
- Required temperature
- Clock
TIME ON indicator
TIME ON setting
PICTOGRAMS
CLOCK
PERMANENT DISPLAY
- The display shows the time when the machine is turned off.
- The display shows the temperature of the water in the pool when the machine is turned on.
HOT/COLD MODE
- Press the MODE button several times to switch from one mode to another.
NOTPACAQX - ind S – 0315
pH 7.00 – 7.80
ppm max 5 for 24 hours
ppm 2 – 3
ppm 20 – 50
10 – 50
TIME OFF setting
indicator
AUTOMATIC
Free chlorine
Salinity
Total alkali strength
TIME OFF setting
AUTOMATIC STOP
17/41
ppm 1 – 3
g/l 0 – 5
°F
Hot or Cold mode*
On / Off
Time setting
COOLING
8 –
HEATING