Thermador HPIN42WS Instrucciones De Instalación página 14

4. Secure the right and left sides of the support frame at
the height determined in Step 3, "B", using four (4) T-
20 Torx head screws.
B
5. Remove the clearance panel.
Page. 14
Securing the hood assembly
6. Using two people, lift the assembled range hood to
the support frame. Slide the lip of the side panel into
the support sleeve of the support frame.
7. Secure the range hood to the support frame with four
(4) ½'' (25.4 mm) screws into the left and ride sides.
CAUTION
DO NOT hang the hood on the support sleeve
without use of the screws for long periods of time. The
support sleeve is not designed to bear the weight of
the hood.