Power On/Power Off - Nevir NVR-TAB101 S2 Manual De Usuario

III. Operation Instruction
1. Basic Operation

1.1. Power on/Power off

Power on:
Press and hold the power switch for 5 seconds; the unit displays the start-up
logo and enters the working mode.
Power off:
Press and hold the power switch for 3 seconds to turn the unit off.
Sleep:
While the device is at working status, press the power switch, it enters the
sleeping mode, and the screen will be off then. Press the power switch again, it
shift to the normal mode. You may use this function when you don't' use the
device temporary to save power.
1.2. Charging
When the device prompts low battery, please charge it by provided charger.
Note:
4