Adaptive Vibration Control - GE GFWH2400 Manual Del Usuario

ADAPTIVE VIBRATION CONTROL

Your GE washer is equipped with Adaptiive Vibration Control
Technology. Using information about the floor, this system
can reduce vibration and improve spin performance in
some installations by adapting the spin cycle. The DEFAULT
configuration is specially designed to provide optimal
performance across the widest range of floor types. Follow
the procedure below to enable more specific adaptive
settings. Your washer can be returned quickly and easily
to the DEFAULT configuration at any time using the same
procedure.
Floor Type Selection
1. With the unit powered off, press and hold EXTRA RINSE
and SPIN buttons simultaneously for 3 seconds.
Cycle Knob
Power
2. Rotate the cycle knob and select FL1, FL2, FL3, or FL4.
Press the START button to make the selection. See the
table below for suggested installations.
FL1 Default**
FL2 Concrete Floor
FL3 Strong Wood Floor
FL4 Normal Wood Floor
**The default setting is acceptable for most installations.
Installation Instructions
Extra Rinse and Spin
3. Rotate the cycle knob and select PE1 or PE2 for
pedestal. Press the START button to make the
selection PE1 is YES and PE2 is NO.
19