Pc Settings - Furrion FDHS32M1A Manual De Instrucciones

Change Settings

PC Settings

The PC menu is only accessible when a PC is connected to the TV via the VGA connection.
NOTE: After connecting a PC, press
1. Press MENU button, the setup window will appear on the screen.
key to highlight Setup mode.
2. Use
or
3. Use or to highlight PC Settings item, then OK
4. Use or to highlight the item you would like to reset, then press
5. Press MENU to return to the previous menu or press EXIT at any time to exit the setting.
H-Pos
Configures the horizontal position of the TV image.
V-Pos Configures the vertical position of the TV image.
Clock Adjusts the pixel Clock (vertical) for a clearer image.
Phase
Adjusts the phase Clock (horizontal) for a clearer image.
Auto Automatically adjusts the PC settings.
PC MONITOR DISPLAY MODES
Mode Resolution
VGA 640 X 480
VGA 720 X 400
VGA 1366 X 768
SVGA
800 X 600
XGA 1024 X 768
*Please note that on non FHD TVs some functionality may be limited.
button and select PC. Press OK
SOURCE
PC Menu
Refresh Rate
60 / 75 Hz
70 Hz
60 Hz
60 / 75 Hz
60 / 70 Hz / 75 Hz
to enter PC Menu table.
or
or
Press or to move the screen horizontally.
Press or to move the screen vertically.
Press or to adjust.
Press or to adjust.
Press OK or to adjust all PC settings
automatically.
PC MONITOR DISPLAY MODES
WXGA 1280 X 720
WXGA
1360 X 768
SXGA 1280 X 1024
WXGA+ 1440 X 900
WSXGA+ 1680 X 1050
FHD 1920 X 1080
to enter.
or
to select the settings.
60 Hz
60 Hz
60 Hz
60 Hz
60 Hz
60 Hz
24