Scuf Infinity 4Ps Pro Controller Set-Up; Scuf Inifnity 4Ps Pro Paddle Removal & Replacement; Interchangeable Thumbstick Control Area - Scuf Gaming INFINITY PRO Guía De Producto

DIRECTIONS
Controller Set-Up
To set up your SCUF first turn on your gaming console, then sync controller to
console. Start a game of your choice. Instructions may be found at:
scufgaming.com/instructions
SCUF Infinity PRO Paddle Removal and Replacement
4PS
Step 1 Lift up slightly on the bottom of the paddle to be removed.
Step 2 Push the paddle upwards, and twist slightly out toward the closest handle to
remove the paddle.
Step 3 To replace a paddle, twist the paddle into the paddle cavity from the top. Then
slide to secure into place. You will hear a click when the paddle is secured in place.
1
3
2

Interchangeable Thumbstick Control Area

Step 1 Place the SCUF Lock over the Infinity Ring and thumbstick on the controller.
The notches on the bottom of the SCUF Lock will insert into the grooves of the Infinity
Ring.
Step 2 Turn the lock counter clockwise until movement stops. Pull straight up on the
thumbstick to remove both ring and thumbstick at the same time.
Step 3 Place a new thumbstick into your controller, make sure to line up the
thumbstick on the thumbstick shaft to ensure correct placement. The thumbstick will
lock into place on the controller.
Step 4 Use your SCUF Lock to secure the ring in place by turning the lock clockwise
until movement stops.
1
3
2
4
S C U F I N FI N I TY P R O
4PS
|
3