Lamborghini Caloreclima 310 PM/2-E Prospecto Para El Uso página 14

14
DESCRIPTION
These are natural gas burners with a mix of gas/air to the combustion head and reduced capacity start-up.
The structure of the combustion head enables the use of all natural gases, mixes and liquids (consult techni-
cal assistance for specific information). The gas/air mix makes it possible to obtain combustion with a low
excess of air, leading to a high combustion efficiency and low CO and NOx emissions, and consequently
a low environmental impact. They are suitable for pressurised and negative pressure furnaces, according to
the relative operating curves. With a long draught tube sliding on a flange, the burners make it possible to
adapt the length of the insertion to the requirements of the boiler. The gas train can be installed on the right
or left (on request). Complete access is easily achieved by means of the hinged opening between the casing
and the burner head, without removing the gas line connection. The burners operate automatically and have
ionisation-probe flame control.
These burners are available with different valve sizes according to the gas flow rate required and the gas
pressure (and boiler) available.