Connection Diagrams - Vortice CB LCD W Manual De Instrucciones

ENGLISH
Reference
(1)
(2)
(3)
(4)
(5)
(6)
Key and display backlighting remains active for about two minutes after the last key
is pressed. When backlighting is off, you can switch it back on again without
activating any function by pressing any key.
NOTE:
Further details and features are described in the paragraph "Operation
and use" in the target product Instructions Manual.

3. Connection diagrams

CAUTION!:
Equipment connection must be carried out by professionally qualified
personnel.
CAUTION!:
The electrical power line to which the equipment will be connected must
be protected by a suitable differential thermal magnetic switch.
Fig. 4
The remote control does not need to be powered to the external power supply but
is wired directly to the target product (via terminal board).
Connection via cable is carried out via an outside wall of a box with an external or
recessed cable.
Function
Key
Description
I
Function recall 1
II
Function recall 2
Exits the page that
X
is displayed.
▲
Increases speed / moves to
the lower value or bottom
▼
Decreases speed / moves
to the upper row or to the
higher value.
✔
Confirmation key (OK)
row.
13