Installation; Operation And Usage; Starting Up; Front Panel - Ecler 2VSP-RS Manual De Instrucciones

3. INSTALLATION

This equipment has been especially designed for placement in 19" racks, filling one height unit.
Two considerations must be taken into account when you look for the right location where to put
your 2VSP: first, maximum user comfort and second, easy access to the back panel in order to plug
several different devices to and from the device.
Your 2VSP has a very low power consumption, so it does not need any fan cooling, but you
should avoid exposing the unit to very extreme temperatures and the atmosphere of the room where it is
located should be as dry and dust-free as possible.
Also, you should place the 2VSP away from noise sources (dimmers, motors, etc...), as well as
from the power cables.
The 2VSP operates on 230V AC or 115V AC, 50-60Hz (switch selectable on the rear panel).
In order to protect the unit from eventual overloads, the 2VSP is protected by a timered power
fuse (31) of 0.63A. If it gets blown up, you must replace it with an identical one. NEVER REPLACE THE
FUSE WITH ANOTHER ONE WITH A HIGHER VALUE.
CAUTION: Fuse substitutions have to be performed by a qualified technician.

4. OPERATION AND USAGE

4.1. Starting up

You can power up this unit by pressing the power switch (1). Although powering up noise is
minimum, it is advisable to power up all your devices by following this sequence: sound sources, mixing
unit, equalizer and - finally - power amplifiers. Powering down sequence must be identical but in reverse
order. By following these simple rules you will avoid any peaks or transients produced by these devices to
reach the following elements of the chain.

4.2. Front Panel

(1) Power ON/OFF switch, POWER
(2) USB port: allows connecting USB memory devices (USB "sticks") from which to play mp3 format
audio files that they contain
(3) LCD display: displays status information and tracks played by the CD/USB/SD player (times, names,
functions, etc.)
(4) CD loader: gently insert a CD here for the unit to place it on the playback tray
(5) Navigation key, previous track, REV: skips to the previous track
(6) Navigation key, next track, CUE: skips to the next track
(7) Stop button, STOP: stops the current playback
(8) Play/Pause key, PLAY/PAUSE: starts/pauses the playback of audio files
(9) Disc eject button, EJECT: ejects the CD from the player
(10) Navigation key, previous folder, ◄◄ FOLDER: skips to the previous folder (press STOP before if
you are in PLAY mode)
(11) Navigation key, next folder ►► FOLDER: skips to the next folder (press STOP before if you are in
PLAY mode)
5