Mounting The Unit; Flush-To-Ceiling - Broan FRESH IN PREMIUM FIN-180P Instrucciones De Instalación

3.1 M
OUNTING THE
��
When choosing a location for this unit, keep in mind that maintenance will have to be performed by the
end user on a regular basis. Choose an easily accessible location and plan for a 14¼-in. clearance for
the door to open.
��
For a 16-in. or 24-in. cc joists installation, use the optional bracket FIN-S1624 (see instructions packed
with bracket).
CEILING HUNG
VH0153A
14¼" clearance
3.1.1 F - -C
LUSH TO EILING
��
If the finishing will be done using the optional decorative finishing trim (part no. FIN-R1015), the springs
included in the optional kit should be installed before installing the brackets.
1. Using 4 screws no. 8-18 x 0.375 in., install the brackets on the unit following the diagram below to
adapt to the thickness of the ceiling. DO NOT USE OTHER SCREWS.
SCREW POSITION ACCORDING
TO CEILING THICKNESS
2. Using 4 screws no. 10-12 x 0.625 in., install the unit between the joists. This unit is designed to fit
between 12-in. cc joists. If the joists are closer, do not force the unit in, choose another installation method.
��
Prior to painting, clean the metal housing using solvent and the plastic decorative finishing trim using water.
U
NIT
ATTIC MOUNTED
12"
VD0466
X = 1 3/8"
X = 1 1/4"
X = 5/8"
X = 1/2"
VD0471
FLUSH TO CEILING
With optional
VD0467
decorative trim
UNDER CEILING
10"
10¼"
VH0154
X
8
WALL MOUNTED
12"
VH0152
VD0470
10"
10"