Tripp-Lite B021-000-19-HD El Manual Del Propietario página 3

Installation
Refer to the installation diagrams below as you perform these steps.
Note: Make sure that the power to the computer or KVM switch being connected to the console is powered off before proceeding with the installation.
1
Using the included cable kit, connect the DVI connector marked CONSOLE to the DVI port on the back of the console.
2
Connect the DVI connector marked SERVER to the DVI port on your server or KVM switch.
Note: If you are connecting to a computer with a VGA port, use the included DVI-I to VGA adapter. If your server or KVM switch uses a DVI-D port, you will need a
DVI-I to DVI-D adapter such as Tripp Lite's P118-000 (sold separately).
3
Connect the USB connector on the SERVER side of the included cable kit to a USB port on your server or KVM switch.
Note: Although KVM switches contain two USB console ports for keyboard and mouse, you can plug the cable kit's USB connector into either port.
4
Remove the USB covers from each of the Pass-Through USB ports. Connect the Pass-Through USB port on the back of the console to a
USB port on a computer or KVM switch using a USB A Male/Male cable, such as Tripp Lite's UR020-Series. Connect a USB device to the
Pass-Through USB port on the front of the console.
Note: The Pass-Through ports do not connect to the internal components in the console (the keyboard, the touchpad or the console).
5
Connect the power cord to the socket on the back of the console, and then plug it into a Tripp Lite Surge Protector, Power Distribution Unit
(PDU), or Uninterruptible Power Supply (UPS).
6
Power on the connected computer or KVM switch.
7
Turn on the LCD screen by pressing the On/Off button on the control panel of the built-in monitor.
Computer Installation
Note: The diagram below shows the connection of a computer with PS/2 keyboard and mouse ports. To connect to a USB computer, use the PS/2 to USB adapter
provided with the console.
5
Computer Installation
KVM Installation
Note: The diagram below shows the connection of a B042-016 KVM switch. The console ports of different model KVM switches may be located elsewhere on
the unit.
5
KVM Installation
Specifications
Function
Console
Cable Kit
Connectors
Power
Comm.
LCD Resolution
Environment
Housing
Weight
Dimensions (L x W x H)
4 1
4 1
Specification
1 x DVI-I female
1 x DVI-I male to 1 x DVI-I male, 1 x USB male
1 x IEC-60320-C14 AC socket (100-240V~, 50/60Hz)
1 x USB (Type A to Type A)
1366 x 768; DDC2B
Operating Temperature: 32°- 104° F
Storage Temperature: -4°- 140° F
Humidity: 0 - 80% RH Noncondensing
Metal
30.8 lbs.
28 x 19 x 1.7 in.
2
3
3
2
3