Intellinet 530347 Guía De Instrucciones Rápida página 2

8-Port Gigabit Ethernet Switch
This guide presents the basic steps to set up and operate this device. For detailed
instructions and specifications, refer to the user manual enclosed with this product
or at intellinetnetwork.com.
Placement
Prior to use, it is recommended that the switch be placed/positioned:
• On a level surface that can support the weight of the switch
(and any other items that need to be considered);
• With a minimum of 25 mm (approx. 1") of clearance on the top and sides
for adequate ventilation;
• Away from sources of electrical noise: radios, transmitters, broadband amplifiers,
etc.;
• Where it cannot be affected by excessive moisture.
Connections
All ports on the switch support Auto-MDI/MDI-X functionality, so you can use
straight or crossover UTP/STP cables to connect the RJ45 ports to PCs, routers,
hubs, other switches, etc.
LED
PWR
1 - 8
Color
• The LED indicators make monitoring and troubleshooting easier. If a status LED
doesn't indicate a link or activity, check the corresponding device for proper setup
and operation.
• Use the included power adapter to connect the receptacle on the back of the
switch to a power outlet, and confirm that the Power LED lights.
English
2
Status
On
Off
On
Blinking
Off
Green
Orange
Operation
Power On
Check connection; turn power on
Valid port connection
Data transmitted/received
No link established
10/100 Mbps connection
1000 Mbps connection
English