JANE nano Manual De Instrucciones página 16

1.- UNFOLDING AND FOLDING
Place the JANÉ NANO folding carrycot on a flat surface.
Turn the ProFix system adaptor outwards. Remove the mat-
tress pad and push the spokes until you hear a click.
the upholstery inside the carrycot and place the mattress pad
on the bottom. 3-4
2.- USING THE HOOD
The hood of the JANÉ NANO carrycot can be folded, unfold-
ed and taken off.
To fit the hood onto the JANÉ NANO carrycot insert the hood
connector into the frame and fasten the rear zip.
move the hood, follow the same process in reverse.
WARNING: The fabric of the hood is the same for the EPIC
hammock and the NANO carrycot. To fit it and remove it from one
to the other, open and close the zip that fastens it to the front
arch and adjust the elastic strap on the back.
3.- FOOT COVER
To open the foot cover of the JANÉ NANO folding carrycot,
unfasten the clips on the top part.
16
To fold it follow the same steps in reverse.
6
4.- FITTING ONTO A JANE PUSHCHAIR
1 To fasten the JANE NANO carrycot onto a Jané chassis, place
the carrycot so that the child is positioned at the side oppo-
2 Fasten site the handlebar.
found on the armrests of the chassis, designed for this; it will
click into place when correctly fastened.
TAKE CARE! Before using it, make sure that all the locking
catches are closed.
To release the carrycot, pull the unlocking buttons on the
connectors upwards and separate the JANÉ NANO folding
carrycot from the pushchair by pulling it upwards.
5 To re-
To improve the balance of your NANO carrycot when it is fit-
ted onto your pushchair you can use the fastening system fol-
lowing the instructions.
- MUUM 8
- EPIC, RIDER, TRIDER
WARNING: Unlock the system before removing the carrycot.
7 Insert the Profix adaptors into the slots
7A
7B
9