Getting Started With Your Phone; The Battery; Charging The Battery - LG Spyder II Manual Del Usuario

Getting Started with Your Phone

The Battery

Note
It is important to fully charge the
battery before initial use of the
phone.
The phone comes with a
rechargeable battery. Keep the
battery charged while not in use
in order to maximize talk and
standby time. The battery charge
level is shown at the top of the
LCD screen.
Installing the Battery
Insert the bottom of the battery
into the opening on the back of
the phone, then push the battery
down until it snaps into place.
Removing the Battery
Turn power off. Slide the battery
cover up, then pull the bottom
side of the battery up to remove
it.

Charging the Battery

Your Spyder II device comes
with a cableless travel adapter
and a USB data cable which are
connected together to charge
your phone. To charge your
phone:
Note
Please use only an approved
charging accessory to charge your
LG phone. Improper handling of
the charging port, as well as the
use of an incompatible charger,
may cause damage to your phone
and void the warranty.
1. Connect the cableless wall
adapter and USB data cable.
When connecting as shown
below, the LG logo on the USB
cable should face toward you.
25