2. Insert the mains plug into the wall socket. The indicator light will now turn on with LCD
highlight.
3. Press (+/-) buttons to set appropriate temperature.
4. Heating will start with a sound and the display will show a flashing heating indicator and
corresponding temperature setting.
5. When heating indicator stops flashing you can start ironing.
6. If you set the temperature control to lower setting after ironing at a high temperature, you
must wait until the cooling indicator disappears before ironing next item.
How to fill water:
1. Before filling water, please pull out the plug first.
2. Pull down the cover of water filling mouth, then fill water.
3. Pull up the cover of water filling mouth, put the iron on the level way.
Vertical Steam:
1. Ensure that there is enough water in the water tank.
2. Stand the steam iron on its heel rest on an iron-safe surface and plug it.
3. Set the temperature control dial and variable steam control to their maximum positions.
4. Hold the iron vertically and press the steam burst button, an intense steam will be ejected
from the soleplate.
When you finished ironing:
1. Pressing (-) button switch iron off.
2. Remove the mains plug from the wall socket.
3. Stand the iron on heel rest.
Automatic Shut Off:
The automatic shutt off device trips after the iron has been left for aproxx. 8 minutes in the upright
Position or unused for aproxx. 30 seconds in the horizontal position and beeps will sound till you
move the iron to restart working or unplug it.
7