Phonic Powerpod 620 PLUS Manual Del Usuario página 10

33. Phantom Power Switch and Indicator
When this switch is in the on position it activates +48V of Phantom
Power for all XlR jacks of all channels on the Powerpod Mixers,
allowing condenser microphones to be used on these channels.
The corresponding lED will illuminate when the Master Phantom
Power is activated.
34. Amp Select Switches
This switches control the activity of the built-in power amp, enabling
the user to alternate between the different signals which can be
processed by the built-in power amp and routed to the speaker
outputs on the rear of the device. This switch allows you to select
from: Main/Monitor – taking the monitor and main signals and
directing them to the appropriate speaker outputs – Main l / Main
R – using the Main l/R signal to feed the speaker outputs – and
Main Bridge – which combines the Main left and Right signal and
feeds them through the (l+R) Bridge output. Please note that
the Bridge function is not available on the Powerpod 780 Plus,
Powerpod 1062 Plus and Powerpod 1082 Plus.
NB. When using a mono bridge connection, do not connect a speaker to any
of the Main/Monitor a or B jacks, located on the rear of the mixer. Use the
"(l+R) Bridge" speaker jack only.
35. Monitor Level Control
This rotary control allows the user to adjust the final signal level
sent to all Monitor outputs.
36. Main Level Control
This rotary control allows the user to adjust the final signal level
sent to the Main l-R and Speaker outputs.
37. Level Meter
These level meters give accurate indications of when audio levels
of the Main l/R stereo (or Main mono) and Monitor outputs reach
certain levels. The 0 dB indicator illuminates is approximately
equal to an output level of +4 dBu. It is suggested for the maximum
use of audio to set the various levels controls so that it sits steadily
between 0 and the second highest level indicated on the level
Meter to make full use of audio, while still maintaining fantastic
clarity. The 620 Plus features a single dual 5-segment lED display,
the 740 and 780 Plus feature two single 5-segment lED displays
(for monitor and main signals), and the 1062 and 1082 Plus feature
single 5-segment Monitor lED level displays and dual 5-segment
Main lED level displays.
38. Limiters
(Powerpods 740, 780, 1062 and 1082 Plus only)
These LED indicators illuminate when the power amplifier's built-in
limiters are activated, which effectively reduce signal levels when
they reach high levels that could prove to damage sound quality.
39. Power Indicator
This lED indicator illuminates when power of your Powerpod
Mixer is activated.
10
POWERPOD 620
33
39
37
34
/ 740 / 780
38
35
36
/ 1062 / 1082