Operations; Multi-Control Panel - Samsung WF50A88 A Serie Manual Del Usuario

Operations

Multi-control panel

01
02
01 Power
02 WASHER / DRYER
03 Navigation dial
04 Start/Pause
05 Display
36 English
Untitled-13 36
05
03
04
Tap to turn the washer on or off.
• After connecting the washer and the dryer with the multi-control cable, only
the washer will turn on when you tap the button. Once the washer turns on,
tap DRYER to turn on the dryer.
• If you do not manipulate the control panel for 10 minutes after turning on
the washer, the washer automatically turns off.
• The washer automatically turns off when the cycle completes.
CAUTION
Do not tap to turn off the power while the cycle is in progress. Tap
pause the cycle first, and then tap
Tap WASHER to select the washer and use its features.
• You can tap and hold WASHER for 3 seconds to cancel the washer operation.
Tap DRYER to select the dryer and use its features.
• You can tap and hold DRYER for 3 seconds to cancel the washer operation.
NOTE
Dryer can be operated from the washer when units are stacked using DV-MCK
accessory (sold separately).
Turn the navigation dial left or right to navigate through cycles and functions.
Your selection (such as cycle, additional functions, and system functions) is
displayed on the LCD as you turn the navigation dial.
You can start or pause the operation.
• The upper button controls the dryer, and the lower button controls the
washer.
• Tap and hold the button to start the operation.
• During the operation, tap the button to pause.
The display shows current cycle information and estimated time remaining, or
an information message when a problem occurs.
07
06
08
to turn off the power.
10
09
to
2021-02-19 6:21:53