Assembly & Set-Up - Snapper 1696701 Manual Del Operador

Assembly & Set-Up
Contents of Carton
• Lawn Mower (1)
• High Lift Blade (1)
Assembly
NOTE: Please be aware that this Operator's Manual covers both
the low and high wheel models of this mower. While this manual
illustrates the low wheel model, the instructions and features
are equally applicable to the high wheel model as well, unless
otherwise noted.
NOTE: This unit is shipped without gasoline or oil in the engine.
Fill up with gasoline and oil as instructed BEFORE operating your
mower.
Handle
1. Remove any packing material which may be between
upper and lower handles.
a. Remove star knobs (a) and carriage bolts (b) from
handle as shown in Figure 3-1. Do not loosen or
remove adjacent hex head screws.
(a)
(b)
a
Figure 3-1
b. While stabilizing mower so it doesn't move, pivot
upper handle up as shown in Figure 3-2. Do not
crimp cable while lifting the handle up.
• Grass Catcher (1)
• Operator's Manual (1)
a
(b)
(a)
• Side Discharge Chute (1)
• Oil (1)
Figure 3-2
2. Remove the T-bolts (a) from the handle brackets as shown
in Figure 3-3.
Figure 3-3
3
b
(a)
9