Tramontina Master 42545 Manual De Instrucciones página 19

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Instruction Manual
a) The pressure washer will not switch on:
- Check whether the plug and outlet are
connected to the power supply correctly.
- Check whether the domestic power voltage is
strong enough for the pressure washer.
- Check whether the on/off switch is in the
correct position.
b) The motor suddenly stops:
- The motor is equipped with a safety device
to protect against overheating.
stops suddenly, switch the machine off for a few
minutes until the temperature is stabilized.
- Check if the machine voltage corresponds to
the mains voltage.
c) The water spray pressure dwindles:
- Check if all the couplings are firmly attached.
The equipment might be sucking in air.
- Check if the water supply to the equipment is
sufficient.
Electrical Safety of the Equipment
a) This pressure washer is double-insulated,
meaning it does not need a grounded plug.
Double insulation - Class II
b) Always check if the supply voltage of the
domestic power corresponds to the voltage
displayed on the equipment's identification
label.
c) Equipment switch. The pressure washer
switch prevents it from running accidentally.
d) Gun safety lock. The safety lock prevents
inexperienced
pressure washer.
e) "TOTAL STOP" system. The pressure washer
is equipped with a "total stop" system, meaning
If the motor
that when the trigger is released, the washer
motor automatically stops.
Operating instructions for
pressure washers
1. Assembling the handle.
- Insert the handle into the top part of the
pressure washer and secure it with the bolts
included using a 3/16x3" Phillips screwdriver.
42545 - High-pressure Washer 1500 psi
people
from
operating
the
19

Publicidad

Tabla de contenido
loading

Tabla de contenido