FAUCET FUNCTIONS
18
18A
Spout (18A) can be rotated around the Faucet Body in any direction.
19 VALVE FUNCTION
19
OPEN
19A
By lifting Lever Handle (19A) up, the valve will be activated allowing water to
flow. The water flow will increase by continuing to lift up Lever Handle (19A).
By rotating Lever Handle (19A) counterclockwise, the water temperature will
decrease to fully cold. By rotating Lever Handle (19A) clockwise, the water
temperature will increase to fully hot.
20 PULLOUT OPERATION
20
20A
Spray Head (20A) can be pulled forward to spray water in any direction.
21 SPRAY OPERATION
ENGLISH
18A
19A
COLD
HOT
21
To activate the spray mode, simply press Toggle Button (21A) located under
the spray head. You can change between spray and stream by pressing the
opposite sides of the Toggle Button (21A/21B) while the faucet is in operation.
To select between hard spray and soft spray, slide Spray Selector Switch (21C)
from side to side.
Note: The faucet will always turn on in regular stream mode.
22 AERATOR CLEANING
MAINTENANCE & CARE
22
22E
22D
22C
Over time, the aerator in your faucet may become clogged with debris. To
clean, unscrew Aerator (22A) from Spray Head (22B) using a 7 / 8 " open ended
wrench or adjustable wrench. Separate Aerator Housing (22C), Aerator Basket
(22D), and Flat Seal (22E). Once parts have been cleaned, reassemble by
reversing these steps.
23 QUICK CONNECT REMOVAL
23
23A
To remove the quick connect attachment, Push up on Quick Connect Housing
(23A). Holding Plastic Collet (23B) in place, pull downward on Quick Connect
Housing (23A) until Tube (23C) is free.
24 HANDLE REMOVAL
5
21C
21A
21B
22B
22A
23B
23C
23A