Publicidad
Idiomas disponibles
Idiomas disponibles
instruction manual
cleAning And MAintenAnce - removing waste from the dust receptacle
1. Remove the plug from the wall socket.
2. Remove the hose.
3. Remove the dust receptacle by pressing the release button on the dust receptacle (see figure 9) and
pulling on the receptacle, and hold it above a waste-bin.
Figure 9
Release button
4. Press the button in the handle to open the bottom flap (see figure 10).
5. If so required, use your hand to remove any waste sticking to the receptacle.
6. Close the bottom flap, and press until it clicks into place.
7. Fit the dust receptacle onto the appliance, and click it into position.
cleAning And MAintenAnce - cleaning or replacing the HePA filter
For best results clean or replace the HEPA filter after every second or third use of the vacuum cleaner, or
more frequently if the filter is visibly blocked.
Clean the HEPA filter regularly to avoid that the filter becomes clogged and the engine overheated.
Figure 11
Removing the HEPA filter
1. Remove the waste from the dust receptacle (see "Removing waste from the dust receptacle").
2. Turn the filterlid from the dust container. (A)
3. Turn the first filter from the dust container. (B)
4. Turn the second filter from the vacuum cleaner. (C)
5. Rinse all filters thoroughly in lukewarm water.
6. Allow the filters to dry thoroughly.
7. Mount the holders and filters in the reverse sequence.
Figure 10
Removing waste from
the dust receptacle
27
Publicidad
