Initial Use; Assembling The Breast Pump - Beurer babycare BY 60 Instrucciones De Uso

Description of display and buttons
1. Battery status (for operation without mains
plug)
2. Pumping mode (to pump breast milk)
3. Time display (timer for stimulation / duration of
use for pumping mode)
4 Stimulation or pumping level
5 Stimulation mode (to stimulate the nipple – no
breast milk is pumped)

6. Initial use

Note
Check that the packaging of the breast pump has not been tampered with and make sure that all com-
ponents are present. Before use, ensure that there is no visible damage to the device or accessories and
that all packaging material has been removed. If you have any doubts, do not use the device and contact
your retailer or the specified Customer Services address.

6.1 Assembling the breast pump

Once the breast pump has been removed from the packaging, check the plastic containers for cracks to
ensure that the electrical components are not exposed to liquids without protection.
1. Screw the pump attachment onto the bottle. Ensure
the pump attachment is firmly secured so that no liq-
uid can escape.
2. Insert the silicone tube into the pump attachment and
the breast pump
2
3
1
5
9
4
20
6
7
8
6. + button (to increase stimulation or pumping level)
7. ON/OFF button
8. - button (to decrease stimulation or pumping level)
9 MODE button (change between pumping and
stimulation mode)