Audiolab MAGNA 12A Manual Del Usuario página 7

Two Active Subwoofers & Two Active Satellite
Speakers
1. Make your initial connections with all the
equipment powered off, and ensure that all
the main volume controls are turned com-
pletely.
2. Connect one side of the signal cable at your
audio mixer into OUTPUT LEFT/RIGHT, and the
other side of the cable intro the LINE INPUT of
your active subwoofers.
3. Connect one side of another signal cable at
your active subwoofers into LINK LEFT/RIGHT
or OUT LEFT/RIGHT, and the other side of the
cable into the LINE INPUT LEFT/RIGHT of your
LINE IN
Pole
Main out left
Line in Left/Mono
Mixer
active satellite speakers. *If you connect into
the OUT LEFT/RIGHT, and press the BYPASS
switch, the 80Hz HPF will be activated.
4. Connect the power cords to main.
5. Turn on your mixer first, then the active
speaker cabinets.
6. Turn up the volume controls of the active
speaker cabinets.
7. Use PFL function to get the proper input
level for the mixer, and adjust the Main Mix
Level.
8. After using, turn off your active speaker cabi-
nets first, the the mixer.
LINE IN
Main out right
Line in Left/Mono
Pole
- AUDIOLAB Magna 12A
English version
P. 7