Panasonic VIERA TC-P55VT30X Manual De Usuario página 43

Wireless network (Wireless network setting)
■
Sets / Changes wireless network setting
Press "Wireless network" and display setting screen
Follow the directions on screen to complete the setting
Wireless network
Please choose connection method:
Search for wireless networks
WPS (Wi-Fi Protected Setup using push button)
WPS (Wi-Fi Protected Setup using PIN number)
Manual settings
* Wi-Fi Protected Setup is an easy setting of the Wi-Fi
Alliance's certification
●
For more details on setting of an Access point, please
refer to operating manual for the Access point.
IP address/DNS settings
Select "IP/DNS setting mode" and set to
"Automatic"
(When IP/DNS automatic acquisition in DHCP can be
used)
Menu
IP address/DNS settings
IP setting mode
Automatic
IP address 192.168.0.5
Subnet mask 255.255.255.0
Default gateway 192.168.0.254
DNS setting mode Automatic
DNS 192.168.0.20
The acquired address is displayed.
Each IP address is acquired automatically
If you are using a broadband router, IP automatic
acquisition in DHCP can be used under normal
circumstances. If you are not sure, check with the person
who installed the equipment, or check the instructions for
each device.
Proxy setting
Set only if specified by the provider. It is not required for normal household use.
Select "Proxy setting"
Menu
IP address/DNS settings
IP setting mode
Automatic
IP address 192.168.0.5
Subnet mask 255.255.255.0
Default gateway 192.168.0.254
DNS setting mode Automatic
DNS 192.168.0.20
Proxy setting
Select item and press OK
Menu
Proxy setting
Proxy address
Proxy port 0
Enter address or port number and press OK
●
Entering characters (p. 21)
Search for Wireless networks:
select
Select an access point from the ones searched for
automatically, and configure the settings as instructed
OK
on the screen.
WPS (Wi-Fi Protected Setup* using push button):
You can connect the Access point to press the
buttons.
WPS (Wi-Fi Protected Setup using PIN number):
Set the PIN code that is displayed on the TV on the
Access point.
Manual settings:
Manually set SSID, Security type, and Encryption type
to match the settings of the Access point to which to
connect.
●
When connecting by 11n (5 GHz), select "AES" as the
Encryption type for the wireless LAN.
■
Manual setting
Select "IP/DNS setting mode" and set to "Manual"
Select the item and press OK
Check the specifications of the broadband router and
enter each IP address.
select
Or Enter each IP address as was specified by the
provider
OK
IP address
■
Proxy address
This is the address of the relay server that is connected
select
to the target server instead of the browser and sends
data to the browser. Setting is only required if specified
OK by the provider.
■
Proxy port
This number is specified by the provider together with the
Proxy address.
select
OK
10I 0 . 0 . OK 0 . 0
43