SECTION 3—CLEANING AND DISINFECTING
Cleaning the Compressor
Unplug unit before cleaning.
NEVER submerge the nebulizer compressor in water,
hold under running water or spray with water or other
liquids. This will result in compressor damage.
If fluid gets into the area around the compressor outlet,
wipe the area off with a dry cloth and let the nebulizer sit
on its front end for five minutes. Then run the compressor
for two minutes without the nebulizer or tubing adapter
in place.
DO NOT clean using abrasive cleaners.
1. Clean the casing of the main unit daily by using a soft cloth
moistened with water or a mild detergent.
2. Wipe the casing and immediately dry using a soft clean
cloth.
Stratos
Pro
™
CAUTION
26
Part No 1130204