Use
•
To select the speed levels, use the push buttons 1 - 3.
0 off
1 weak
2 medium
3 strong
•
The oscillation switch (1) can be used to turn on and off the
uniform oscillation of the ventilator.
WARNING:
• Always remove the mains plug before cleaning the device.
• Under no circumstances should you immerse the device in water
for cleaning purposes. Otherwise this might result in an electric
shock or fire.
CAUTION
•
Do not use a wire brush or any abrasive items.
•
Do not use any acidic or abrasive detergents.
•
Clean the outside of the device with a dry cloth without any
additives.
•
If the device is very dirty wet a cloth with water and then
wipe the device dry once you have finished.
Maintenance and storage
•
Clean the appliance as described.
•
We recommend that the appliance is kept in its original
packaging if you do not intend to use it for long periods.
•
Always store the appliance out of the reach of children, in a
well-ventilated and dry place.
Noise development
The workplace-related emission value is less than 70 dB(A).
off
on
Cleaning
Turning on
Without timer
1. Turn the rotary switch (3) in anti-clockwise direction to the
ON position.
2. Select a speed level from 1 to 3.
With timer
1. Turn the rotary switch (3) in clockwise direction. You can
select operating times of up to 120 minutes.
2. Select a speed level from 1 to 3.
Following expiry of the timer, the ventilator will automatically
switch off.
Terminating operation
1. Press the 0 button and set the rotary switch to the OFF
position.
2. Pull the plug from the socket.
Technical Data
Model: ...........................................................................T-VL 3546
Power supply: .................................................220-240 V~, 50 Hz
Power consumption: ............................................................. 55 W
Protection class: .......................................................................... II
Net weight: ........................................................... approx. 2.20 kg
The right to make technical and design modifications in the
course of continuous product development remains reserved.
This device has been tested according to all relevant current
CE guidelines, such as electromagnetic compatibility and low
voltage directives, and has been constructed in accordance
with the latest safety regulations.
27