Phonic SAFARI 3000 Manual Del Usuario página 11

5. Find Button: Push this button once to enable search by FILE.
Push it twice to search by ALBUM. Push and hold to view the
track; push a second time to view the ID3 tag.
6. ESP Button: Push this button to activate anti-shock mode
when CDs are in use. The anti-shock time is approximately
40 seconds. Push this button again to deactivate anti-shock
mode.
7. Reverse/Cue Buttons: Push either of these buttons to skip
to the previous track (rev) or to cue the next track (cue). Hold
either of them down to fast-forward (cue) or reverse (rev)
through the currently playing track. These buttons also allow
for users to scroll through menus.
8. Folder Buttons: Push these buttons to skip backwards and
forwards alphabetically through folders found on CD, USB or
SD/SDHC medium.
9. Repeat Button: Push this button to scroll through the different
repeat modes that the CD player offers. Users can opt to play
all tracks, play tracks randomly, repeat one track only, repeat
the entire folder, repeat all and random repeat. When in CD
mode it will allow you to select between random, repeat track,
repeat all and random repeat.
10. Display Button: This button will switch through the various
display modes. Available modes are: track number and play
time; total number of songs; name of current song, and; total
number of songs and folders.
11. Record/Delete Button: Push this button to initiate record
mode when set to USB or SD/SDHC mode. Recording will
begin in pause mode, and users can push the play/pause
button to begin recording.
12. Function Button: Push this button to scroll through the dif-
ferent operation modes of the Safari's CD player. Users can
select from CD mode, USB mode or SD/SDHC card mode.
13. Eject Button: When no track is playing or recording, pushing
this button will eject the disc within the CD slot.
14. Mute Button: Push this button to mute the currently playing
track.
15. VOL Buttons: These buttons allow users to increase and
decrease the CD player's volume.
16. 0 – 9 Buttons: Enter the track number you wish to play to
skip directly to it.
USB Recorder/Player (USBR-1)
5 6
1. Record Button: Push and hold this button for 2 seconds to
initiate recording.
2. Play/Pause Button: Push this button to begin playback and
again to pause. This button is also used to pause and begin
recording. This button is also used as an 'enter' button when
navigating menus.
3. Reverse/Cue Buttons: Push either of these buttons to skip
to the previous track (rev) or to cue the next track (cue). Hold
either of them down to fast-forward (cue) or reverse (rev)
through the currently playing track. These buttons also allow
for users to scroll through menus.
Safari 3000
1 3 2 4
7
4. Stop/Menu Button: This button will stop the currently playing
or recording track. Keep pushing this button will bring up the
main menu where users can set repeats or delete files. This
button also works as a 'back' or 'cancel' button when navigating
menus.
5. USB Connector: Connect your USB flash drives here. Flash
drives can be used to record to or for playback of MP3 or WMA
files.
6. Display: This screen will show the USBR-1's current status
and file properties.
7. Power/Volume Control: This rotary control adjusts the
outgoing signal level when playing back audio files from the
USBR-1 module. It also allows you to turn the module on and
off. To change the on/off status of the module, simply push in
the control. Turn it to the right to increase the volume and to
the left to reduce the volume.
Playback of Files
After connecting a USB flash drive the USBR-1 will take a few
seconds to read files on the disc. Users can then navigate either
files recorded by the USBR-1 ("Recorded") or their own MP3 or
WMA files ("Files"). Within the Files menu, directories are indicated
by an "F" icon while files are indicated by a musical note. Press
Play/Pause to play a track.
Playback Display
During playback the screen will show the following properties:
File Type (MP3 or WMA), Sample Rate, Status (Play or Pause),
Time (Minutes and Seconds) and Track Details (Name, Artist
and Album).
Repeat Mode
To activate repeat for playback, push and hold the Stop/Menu
button and select the Repeat option. There are four repeat
options available: No Repeat, Repeat One, Repeat All or Repeat
Directory.
Recording an MP3
Push and hold the Record button for 2 seconds to start recording.
Recording will begin in pause mode. Push the Play/Pause button
to begin recording. Push the Stop/Menu button to finalize the
recording. Do not remove your USB media when the screen
displays "READING" as the USBR-1 is writing your file to the USB
drive. Files will be recorded in MP3 format at 192 kbps sampling
rates by default.
Changing to Recording Bitrate
Push and hold the Record button for 4 to 5 seconds to enter the
sample rate menu. When you do so, the two available sample
rates will appear on screen: 128 kbps and 192 kbps. Push the
record button again to swap the sampling rate.
Deleting a File
Whenever a file is highlighted users can push and hold the Stop/
Menu button for 4 seconds to access the menu. Use the cue button
to scroll down to "DELETE" and push the Play/Pause button to
accept. Press the Play/Pause button again to confirm deletion or
the Stop/Menu button to decline.
7