Protecting The Cooktop Surface; Using The Smart Connect Feature - Samsung NZ36K7880U Serie Manual De Instrucciones

Protecting the cooktop surface

Cleaning
• Clean the cooktop before using it for the first time.
• Clean your cooktop daily or after each use. This will keep your cooktop
looking good and can prevent damage.
If a spillover occurs while you are cooking, immediately clean the spill while
•
it is hot to prevent a tough cleaning chore later. Using extreme care, wipe the
spill with a clean, dry towel.
• Do not allow spills to remain on the cooking area or the cooktop trim for a
long period of time.
• Do not use abrasive cleansing powders or scouring pads, which will scratch
the cooktop.
Do not use chlorine bleach, ammonia, or other cleansers not specifically
•
recommended for use on a glass-ceramic surface.
Preventing marks and scratches
• Do not use glass cookware. It may scratch the cooktop.
• Do not place a trivet or wok ring between the cooktop and a pan or wok.
These items can mark or scratch the cooktop.
• Make sure the cooktop and the pan bottom are clean.
• Do not slide metal pans across the cooktop.
Preventing stains
• Do not use a soiled dish cloth or sponge to clean the cooktop surface. A film
will remain, which may cause stains on the cooking surface after the area is
heated.
• Continuously cooking on a soiled surface can result in a permanent stain.
Preventing other damage
• Do not allow plastic, sugar, or foods with high sugar content to melt onto the
hot cooktop. Should this happen, clean immediately.
Do not let a pan boil dry as this will damage the cooktop and the pan.
•
• Do not use the cooktop as a work surface or cutting board.
• Do not cook food directly on the cooktop. Always use the proper cookware.
NZ36K7880U_DG68-00824A-00_EN+MES+CFR.indb 29

Using the smart connect feature

The cooktop has built in a Wi-Fi module that you can use to sync the cooktop with
the Samsung Smart Home app. On the smartphone app, you can:
• monitor the operating status and the power level settings of the cooktop
elements.
• check and change the timer settings.
Functions that can be operated from the Samsung Smart Home app may not work
smoothly if communication conditions are poor or the product is installed in a
place with a weak Wi-Fi signal.
How to connect the cooktop
Before you can use the remote features of your Samsung cooktop, you must pair it
to the Smart Home App.
Download and open the Samsung Smart Home app on your smart device.
1.
2. Press the POWER key to turn the cooktop on.
3. Follow the app's instructions, and then touch and hold the Smart Connect key
for 3 seconds.
4. While the connection is being made, the LED indicator above the Smart
Connect key blinks. Once the process is complete, the indicator glows without
blinking. Now the cooktop is connected successfully.
If the Smart Connect LED indicator does not turn on, follow the instruction in
5.
the app to reconnect.
NOTE
• Make sure to set the Smart Connect function only when no hob operation is in
process.
• For further instructions, refer to the web manual at www.samsung.com
Wi-Fi On/Off
• Touch the Smart Connect key to turn on or turn off the Wi-Fi connection.
English 29
8/5/2016 2:01:42 PM