D-Link DIR-822 Guía De Instalación Rápida página 4

PRODUCT SETUP
WEB-BASED SETUP
Router
Router
12V 1A POWER
4 3 2 1 INTERNET RESET
PC
Router
12V 1A POWER
4 3 2 1 INTERNET RESET
WELCOME TO THE D-LINK SETUP WIZARD
2
Step 1
Position your DIR-822 near your Internet-connected modem and
PC. Keep the router in an open area for better wireless coverage.
PC
Modem
Step 2
Modem
Unplug the modem Ethernet cable connected to your computer and
plug it into the port labeled INTERNET on the router.
Connect the supplied power adapter to the router and a power
outlet, then verify that the power LED on the DIR-822 is on.
Step 3
Plug one end of the supplied Ethernet cable into the port labeled 1
on the back of the router, and the other end into the Ethernet port on
Modem
your computer.
To set up the DIR-822 through Wi-Fi, go to your computer or mobile
device's Wi-Fi settings and select the network (ex: dlink-A8FA).
Enter Wi-Fi password (ex: akbdj19368) printed on the included
Wi-Fi Configuration Note.
Step 4
Open a browser on the connected computer. If you are not
automatically directed to the D-Link Setup Wizard, go to
http://dlinkrouter.local./ and follow the onscreen instructions to
configure your DIR-822. Use Admin as your username and leave
the password blank to access the configuration utility.
DIR-822