QFX PBX-3010BT Manual Del Usuario página 4

PBX-3010BT
PBX-3010BT FRONT PANEL
1.AUX 1 Input (RCA): The RCA Input is designed to connect directly to a CD/DVD/TV or any other
stereo level audio device.
Please note that there are two LINE Inputs, RCA and 1/8". If both the RCA and 1/8"inputs are
connected the unit is automatically play from the 1/8" Line input. To play from the RCA Line input,
please disconnect the 1/8" connection from the 1/8" Line Input.
2.AUX 2 Input(1/8"): The 1/8" Line Input is designed to connect directly to a mp3 player or any
other stereo level audio device. Please note that there are two LINE Inputs, RCA and 1/8". If both
the RCA and 1/8"inputs are connected the unit is automatically play from the 1/8" Line input.
3.Power Supply: The power switch should be set to the off position before the power supply is
connected.
4.Voltage Selector 120V-240V. Be sure the unit's voltage in the outlet you are using.
5. Power Button: Press this button to power the unit on, off or to charge the unit. If the battery
needs to be charged, set the unit to AC and connect the power cable to the rear of the unit. When
set to AC, the unit can also be powered by an external power supply (electrical outlet) even if the
battery is dead. In this case you need to have the unit set to the voltage corresponding to the
voltage of the outlet. To turn the unit off set the power button to OFF. It is recommended to fully
charge the battery prior to using the unit for the first time. It is also recommended to charge the
battery at least every 2-3 months to keep the battery operating to it highest capacity.
6.Antenna is for receiving the FM signal. Before use, pull up the telescopic FM antenna. After
use,pack up the FM antenna to better protect it.
7.DC 12V IN is for connecting to 12V external battery if needed.
8.12V FUSE:Provided battery is damaged or internal short circuit, the fuse will be burnt in order
to protect the machine &battery. The unit can work well after replace a new fuse.
-3-