General Specifications - Klein Tools DTL302 Manual De Instrucciones

The Klein Tools DTL302 is a hand-held dual differential Digital Temperature
Tester that offers logging, monitoring and uploading capabilities to help
analyze system performance trends with the included software.
•
Dimensions:
16.2 oz
•
Weight:
•
Operating Temperature:
•
Storage Temperature:
•
Humidity:
85% RH: 50° to 86°F (10° to 30°C)
70% RH: 86° to 104°F (30° to 40°C)
45% RH: 104° to 122°F (40° to 50°C)
•
Altitude:
•
Battery:
•
Certifi cations:
IEC 1010-1 (2001)
EN 61010-1 (2001)
No. 1010.1 (1992)
IP67 IEC 60529, Immersion (30 min) & Dust proof
•
Overvoltage:
•
Pollution Degree:
To ensure safe operation and service of the tester, follow these instructions.
Failure to observe these warnings can result in severe injury or death.
• Follow the manufacturer's maintenance procedures when
servicing equipment.
• Place ONLY thermocouples (type K, J, T, or E) in the thermocouple
ports.
• Make sure your meter is set for the proper thermocouple type.
• Be sure the thermocouple you use can withstand the temperature
extreme it may be exposed to in your service task.
• Properly maintain your thermometer and calibrate it regularly.
• Do not use if the thermometer has cracks or any other damage to
the case.
• Disconnect thermocouple before replacing batteries or opening
case.
• Replace batteries when low battery indicator appears on the
screen. Low batteries can aversely affect thermometer accuracy.
• Do not apply voltage to thermocouples. There should be no more
than 1V between any two thermocouples, and no more than 30V
between any thermocouple and earth ground.
WARNINGS:
Always wear approved eye protection.
Do NOT use on energized circuits.
Digital Thermometer
Instruction Manual

GENERAL SPECIFICATIONS

7.20"h x 3.70"w x 1.70"d
Non condensing <50°F (10°C)
Operating - up to 2000 m/Storage - 10000 m
2 (AAA) type 1.5V
CE
(Installation) CATEGORY I
2 (IEC 1010-1)
14° to 122°F (-10° to 50°C)
-40° to 140°F (-40° to 60°C)
WARNINGS WARNINGS
3