Hitachi SV 12SG Manual De Instrucciones página 15

[4-3/8" × 4" (110 × 100 mm) sanding paper (Velcro type)]
(1) Match the holes in the sanding paper (Velcro type) to the holes in the sponge pad
(velcro type).
(2) Surely attach the sanding paper (Velcro
type) by strongly and evenly pressing with
your palm. (Fig. 12)
[5" (125 mm) quick stick sanding paper]
Attach the quick stick sanding paper to the 5" (125 mm) round rubber pad in the same
way as shown in "6. Installing the sanding paper" on page 11.
3. Opening holes in the sanding paper
with the punch plate
Dust collecting capacity will improve if the
punch plate is used to open holes in sanding
paper without holes.
Sanding paper (Velcro type)
Punch plate
Sponge pad
(Velcro type)
Fig. 11
Press strongly
Fig. 12
Fig. 13
English
15