5. Maintenance
- Test the smoke detector is working properly once a week using the test button. If the
smoke detector is working correctly, you will hear a beep. Because the alarm is very loud,
make sure you keep your distance from the unit while carrying out the test. If the smoke
detector does not emit a beep, it must be replaced immediately!
- Clean the smoke detector at least once a month to get rid of grime, dust and debris. Use
a vacuum cleaner with a soft brush and pass it over the sides and the lid of the smoke
detector. Do not remove the upper cap on the smoke detector to clean the insides.
- Do not attempt to repair the smoke detector. If the smoke detector is damaged in a way
that affects how it works, it must be replaced!
- False alarms are often caused by dust or steam.
6. Warnings
- To avoid injuries, this device must be securely fixed the ceiling in accordance with the
instructions.
- The batteries must not be exposed to excessive heat, such as sunlight or fire.
- Do not paint or cover the smoke detector
- Proper operation of the Detector is ensured by the use of one of the following batteries:
Raymax – 6LR61 (9 V 560 mAh) / Duracell – MN1604 (9 V 600 mAh) / Gold Peak –
GP1604A (9 V 550 mAh)
7. Technical specifications
Detection method
Power supply
Battery life
Recommended batteries
optical
replaceable
5 years
o Raymax – 6LR61 (9 V 560 mAh)
o Duracell – MN1604 (9 V 600 mAh)