HP Smart Tank 510 Serie Guía De Referencia página 3

or
The Resume light (
The Ink/Printhead light ( ) and the
Resume light ( ) are blinking.
The Resume light (
C M Y K
The CMYK icons are on, and one or
more Ink icons ( ) are blinking.
C M Y K
The CMYK icons are on, and one or
more Ink icons ( ) are blinking. The
Ink/Printhead light ( ) is on.
C M Y K
The CMYK icons are on.
The Ink/Printhead light ( ), one or
more Ink icons ( ), and the Alert
icon ( ) are blinking.
The Ink/Printhead light ( ), the
Color or Black Printhead icon ( ),
and the Alert icon ( ) are blinking.
Paper width mismatch (E1) or Paper length mismatch (E2)
1. Press
2. Load paper that matches the size of the page you want to
print, or change the paper size settings in your application
to match the size of the paper you are using.
3. Print the document again.
) is blinking.
Carriage jam (E3)
1. Open the front door, then the printhead access door.
2. Make sure the printhead latch is properly closed and the
print carriage is not obstructed. Do not open the printhead
latch.
3. Remove any jammed paper or other objects blocking the
carriage.
4. Close printhead access door and front door.
5. Press
(Cancel button).
Paper jam (E4)
Clear paper jam, and then press
printing.
) is blinking.
Ink tank is low on ink
Refill the indicated ink tank that is low on ink.
Ink tank is very low on ink
Refill the indicated ink tank that is very low on ink.
Ink tank is out of ink (E7)
Refill the indicated ink tank that is out of ink.
Printhead issue
• Make sure both printheads are properly installed.
• If both printheads are installed, remove one or both
printheads indicated, make sure there is no orange plug
or plastic tape on them, and then reinsert the printheads
securely.
• Make sure that you are using the correct HP printheads for
your printer.
Note: Do not open the printhead latch unless instructed to do so.
(Cancel button) to cancel printing.
(Resume button) to continue printing or press
(Resume button) to continue
3