8
ADVICE FOR USE
PUTTING ON THE HELMET
Once the chin strap is released, you
have to take hold of the two sections
by the buckles and hold them slightly
apart to facilitate the passage of your
head. While carrying out this move-
ment, you are advised to keep the two
sections of the chin strap apart with
your thumbs so that they are properly
positioned.
Position the protective parts of the
chin strap buckle correctly and fasten
it in accordance with the recommen-
dations that are appropriate to the
versions and country.
Check that the tension and therefore
the positioning of the helmet are cor-
rect for all positions. If this is not the
case, you must continue to adjust
the length until you achieve the ideal
positioning.
REMOVING THE HELMET
Release the chin strap. Hold the two
sections slightly apart as for putting
the helmet on and remove the helmet.
WARNING!
properly fasten your chin strap
or obtain the correct fit of your hel-
met on your head, DO NOT USE THE
HELMET! See your retailer for assis-
tance.
If
you
cannot