Mounting on a Table
1
Lift and tilt the TV into its upright position on
a table.
- Leave a 10 cm (4 inches) (minimum) space
from the wall for proper ventilation.
1 0 c m
2
Connect the power cord to a wall outlet.
CAUTION
•
Do not place the TV near or on sources
of heat, as this may result in fire or other
damage.
Adjusting the angle of the TV to suit view
Swivel 20 degrees to the left or right and adjust
the angle of the TV to suit your view.
20˚
CAUTION
•
When adjusting the angle of the TV, watch
out for your fingers.
- Personal injury may occur if hands or fingers
are pinched. If the product is tilted too much,
it may fall, causing damage or injury.
10 c m
(4 in c h e s )
1 0 c m
m
1 0 c
20˚
ASSEMBLING AND PREPARING
Attaching the TV to a desk
(Depending upon model)
The TV should be attached to a desk so
it cannot be pulled in a forward/backward
direction, potentially causing injury or damaging
the product.
TYPE 1
4-Screws
(Not provided as parts of the product)
Stand
NOTE
•
Screw: M5 x L (*L: Table depth + 8~10 mm)
ex) Table depth: 15mm, Screw: M5 x 25
15
Desk