Valore VS 2000 Plus Manual De Instalación Y Utilizacion página 14

1
Pressure Balance valve
• Place the Pressure Balance valve (#10), into the valve
body. Note the one pillar on the bottom of the Pressure
Balance valve (#10) must be aligned with the hole in
the rear of the body.
3
8
• Using the knob (#8), rotate the valve counter clockwise
to its fully closed position.
5
1
• Tighten the set screw (#1) to secure it. Do not
overtighten.
How to install the Pressure Balance Valve
10
8
(2.5 mm)
1
2
• Tighten the gland nut (#9). Take precaution to avoid
scratching the trim plate. Do not force the nut too tightly.
4
• Reinstall the knob (#8) with the handle pointing towards
the "C" position.
6
• Replace the cover (#3) and nish the install.
- 14 -
9
C
8
3
3
9