Connecting The Charger/Charging The Li-Ion Battery; Change The Li-Ion Battery - Aesculap Econom CL Instrucciones De Manejo

4.3 Connecting the charger/Charging the Li-ion battery

Fire hazard due to battery poles shorted by fluids
or metal components!
Li-ion battery not inserted
WARNING
Risk of injury due to damaged mains power cord!
Check mains power cord for any damage before
charging.
WARNING
Arrange for any damaged mains power cord to
be replaced by the manufacturer.
Risk of injury and material damage due to
damaged Li-ion battery!
Prior to charging, check the Li-ion battery for
WARNING
any damage.
Do not use or charge any damaged Li-ion
batteries.
Loss of capacity/performance due to prolonged
storage of the discharged Li-ion battery!
Store Li-ion batteries only in fully charged
CAUTION
condition and recharge stored batteries once
every month.
Destruction of the product, charging bay or Li-ion
battery when inserting the wrong type of battery
in the charging bay!
CAUTION
Insert Li-ion battery only in the appropriate
charging bay.
Note
The charger can be used by children if 8 years or older, as well as by persons
with reduced physical, sensory or mental capacities or with lack of
experience and knowledge, if these persons are supervised or have been
instructed on how to use the device safely, and if they understand the risks
associated with the use of the device.
Do not allow children to play with the device.
Do not allow children to clean or maintain the device without
supervision.
Note
The Li-ion battery heats up slightly during charging.
Note
Disconnect the mains power cord at the mains socket when the charger is
not going to be used.
Only use the Aesculap GT803 charger for charging the lithium ion
batteries.
To connect charger 40: Plug the device plug of the mains power cord
into the charger.
Plug in the mains plug of mains power cord at the mains power socket.
Plug the lithium iron battery 39 into the charging bay of the charger
and charge it, see Fig. F.
The LEDs in the charge status display d of the lithium ion battery blink
in accordance with the current charge status. When all the LEDs are
permanently illuminated, the battery is completely charged.

4.4 Change the Li-ion battery

Hold the battery-operated clipping machine g with the cutter head
downwards so that the lithium ion battery 39 does not fall down when
loosened, see Fig. 1.
Loosen the battery lock f with your thumb.
39
Fig. 1
f
g
5