Beper RI.161 Manual De Instrucciones página 8

Carbon heater Use instructions
Before cleaning, always unplug the appliance.
To protect against electric shock, do not immerse cord, plug or any
parts of the appliance into water or other fluids.
Do not hold the appliance with wet hands or feet.
Do not hold the appliance with naked feet.
Do not expose the appliance to atmospheric agents such as rain,
wind, snow, hail.
Do not use the appliance near explosives, highly flammable mate-
rials, gases, burning flames, heaters.
DO NOT ALLOW CHILDREN, DISABLED PEOPLE OR
EVERY PEOPLE WITHOUT EXPERIENCE OR TECH-
NICAL ABILITY TO USE THE APPLIANCE IF THEY
ARE NOT PROPERLY WATCHED OVER. CLOSE SU-
PERVISION IS NECESSARY WHEN ANY APPLIANCE
USED BY OR NEAR CHILDREN.
MAKE SURE THAT CHILDREN DO NOT PLAY WITH
THIS APPLIANCE.
IF YOU DECIDE NOT TO USE THE APPLIANCE ANY
LONGER, MAKE IT UNSERVICEABLE BY SIMPLY
CUTTING THE SUPPLY CABLE AFTER DISCONNEC-
TING THE PLUG FROM THE SOCKET.
ALSO MAKE ANY DANGEROUS PARTS UNSERVICE-
ABLE, ESPECIALLY FOR CHILDREN WHO COULD
PLAY WITH THE APPLIANCE.
PRODUCT DESCRIPTION Fig.A
1. Operation knob
2. Carbon heating elements
3. Base
INSTRUCTIONS FOR USE
Base assembly
Assemble the carbon heater body and the base, using the specific fixing screws (Fig.B).
OPERATION
WARNING! DO NOT COVER THE HEATER DURING OPERATION
Place the heater on a horizontal surface.
Turn the knob to the left in order to pick the desired power: 450W (MINIMUM HEAT), 900W (MAXI-
MUM HEAT)
8