Running The Train For The First Time - marklin 36100 Instrucciones De Empleo

6.3 Train
The built-in rechargeable battery must be charged
up before operating the train for the fi rst time!
Make sure the train is turned off before char-
1
ging the battery.
Plug the mini USB plug on the recharging
2
cable included with the train into the mini
USB socket on the train.
The USB plug for the charging cable included
with this set may only be connected to a
charging device from Protection Class II
(example: from a cell phone charger), which
is provided with the following symbol:
The red light in the train will be on during the
charging process.
The charging time with the cable included
with the train is approximately 3 hours.
The train is recharged when the red light in
the train goes out.
After the rechargeable battery is fully char-
3
ged, the charging cable must be removed
from the train and the charging device.
The train can be run approximately 2.5 hours
with a complete charge in the battery.
12

7. Running the Train for the First Time

7.1 Preparing the Train / Turning the Train on
The switch settings on the train
1
and on the remote controller must
agree with each other.
G - G
H - H
Place the motor and control cars on the track
2
or on a smooth fl at base or fl oor.
3
Couple the cars together.
G - H
H - G