Pioneer DEH-X6800BT Manual De Instrucciones página 10

TIP
When two phones are connected to the unit via Bluetooth and there is an incoming call while one
phone is being used for a call, a message will appear in the display. To answer that incoming call, you
need to end the existing call.
Basic operations
Purpose
End a call
Reject an incoming call
Switch between the current caller
and a caller on hold
Cancel a caller on hold
Adjust the volume of the caller's
voice (When private mode is on,
this function is not available.)
Turn the privacy mode on or off
To preset phone numbers
1
Select a phone number from a phone book or call history.
2
Press and hold one of the number buttons (1/
The contact is stored in the selected preset number.
To make a call using a preset number, press one of the number buttons (1/
then press the M.C. dial.
Voice recognition (Only for iPhone)
This function is only available when an iPhone equipped with voice recognition is
connected to the unit via Bluetooth.
1
Press and hold to activate the voice recognition mode.
2
Press the M.C. dial and then talk into the microphone to input voice commands.
To exit the voice recognition mode, press BAND/
NOTE
For details on the voice recognition features, refer to the manual supplied with your iPhone.
10
En
Operation
Press .
Press and hold when a call is received.
Press the M.C. dial.
Press and hold .
Turn the M.C. dial during the call.
Press BAND/ or BAND/ during the call.
to 6/ ).
or BAND/ .
Phone menu
Menu Item
RECENTS
[MISSED]
[DIALED]
[RECEIVED]
PHONE BOOK*1
PRESET 1-6
A.ANSR*2
[ON], [OFF]
R.TONE
[ON], [OFF]
PB INVT
PB A.SYNC
[ON], [OFF]
to 6/ ),
BT SETTING
*1 The contacts on your phone will normally be transferred automatically when the phone is
connected. If they are not, use your phone to transfer the contacts.
*2 If two phones are connected, this function does not work on incoming calls that are received while
one of the phones is being used for a call.
Description
Display the missed call history.
Display the dialed call history.
Display the received call history.
Display the contacts which have been transferred from your
phone. Set [VISIBLE] in the Bluetooth settings to [ON] to browse
the contacts via this unit.
Recall the preset phone numbers. You can also recall the preset
phone numbers by pressing one of the number buttons (1/
to 6/ ).
Select [ON] to answer an incoming call automatically.
Select [ON] if the ring tone does not come out from the car
speakers. Depending on the connected phone, this function
may not work.
Invert the order of names in the phone book (name view).
Select whether or not to transfer the contacts from your phone
automatically when your phone is connected to the unit.
• When connected for the first time, the contacts from your
phone are transferred automatically, regardless of the [PB
A.SYNC] setting.
• If you switch from [ON] to [OFF], the auto synchronization will
not be performed on the next connection.
• If you switch from [OFF] to [ON], the auto synchronization will
be performed when your phone is connected to the unit.
• During the auto synchronization, you cannot cancel the
synchronization, even if you select [OFF].
You can adjust various settings for Bluetooth connections. For
details on Bluetooth settings, see page 9.