Setting The Alarm - Hamilton Beach HCR410 Manual De Uso

Operating Instructions
6. To turn off the radio, just press the RADIO ON/OFF button
once more to switch to clock mode.

SETTING THE ALARM

Once desired station and volume level are set:
1. Press the RADIO ON/OFF button to switch to clock mode.
2. To set alarm time, hold down the AL SET/
2 seconds until "12:00" or the previously set alarm time is
flashing. Press the HOUR/TUNE– and/or MIN/TUNE+ buttons
to set the desired alarm time. Wait 4 seconds (4 flashes) or
press the AL SET/
turn on. That means the buzzer alarm is set for the preset
time.
3. To change the alarm to wake to the radio, tap on the
AL SET/
That means the radio alarm is set for the preset time.
4. To turn alarm off, press the AL OFF/
alarm function is turned off, and the " " and " " indicators
will disappear.
5. When the alarm turns on, the " " or " " indicator will flash.
You can press the AL OFF/
" " or " " indicator will turn off.
NOTES:
• If there is nothing operating when the alarm is on, the alarm will
turn off after 1 hour. After the alarm turns off, the alarm is not
available for the next day. You need to reset the alarm clock.
• " " alarm should be the last station when the radio was
shut off.
button once more. The " " indicator will
button once and the " " indicator will turn on.
button at any time. All
button to stop the alarm. The
9
(cont.)
button for