Control Buttons - Fermax iLOFT DUOX Guia De Inicio Rapido

START GUIDE FOR MONITOR iLOFT DUOX

CONTROL BUTTONS

CONFIGURING AS MASTER PANEL
Press the SW1 button 3 consecutive times quickly. After 2 seconds, a confi rmation tone is heard,
and the master panel is activated. Once having completed the monitors' programming, deactivate
the MASTER panel by pressing the SW1 button 3 consecutive times.
HOW TO PROGRAM THE iLOFT MONITOR
1. INSTALL
Monitor powered for the fi rst time.
The blue led blinking slowly indicates that the monitor has not been
programmed.
2. ENTER PROGRAMMING MENU
Press the
PROGRAMMING FROM THE PANEL
PROGRAMMING MENU
Select the
Enter the calling code for this monitor from the panel (calling code for this monitor). A different
call tone sounds, confi rming the monitor´s programming. After a few seconds the monitor
returns to standby.
2
DUOX ILOFT MONITOR
Digital menu for internal parameter settings and confi guration.
(When the monitor has already been programmed)
In conversation, press to open the door.
In standby, call to guard unit (if applicable).
Auxiliary function, (contact your installer).
In standby, press and it displays the option of auto-starting with
different panels. By sequentially pressing Panel 0, Panel 1, General
Panel, (depending on the available panels).
Audio activation and hang-up (hands-free functions).
iLOFT monitor incorporates an OSD menu that is managed via the monitor´s
push buttons to access the terminals´user and programming functions.
The icons displayed are managed with the corresponding buttons located on
the monitor.
button to access the "programming menu."
icon and confi rm with , (you hear a beep in the monitor).
Cod. 970003 V09_16