3. Installation and Setup
Remove the accessory package and inspect the package contents. The standard
shipping package should contain an Owner's Manual and RS-232 cable. The key to
the UPS is attached to the front door with a cable tie. Packaging may also include
additional accessories and components, depending on specific customer orders.
Note: Before installing, please inspect the unit. Ensure there is no physical damage to
the unit. Do not turn on the unit. Notify the carrier and dealer immediately if there is any
damage or missing parts and accessories. Keep the original packaging for future use. It is
recommended you keep each equipment and battery set in their original packaging, as it is
designed to provide maximum protection during transportation and storage.
3.2 Open Front Panel View
Each UPS comes equipped with a front door key. The key can be found attached to the front door with a cable tie. Upon opening the
front door, you will see the communication area and several power stages/modules inside. From each power stage/module you can easily
identify its ID.
Table 3.1 Power Stage ID
Power Rating
Stage ID—Individual Unit
Operation
Stage ID—For Parallel
UPS
100K
120K
Owner's Manual
160K
9
RS-232 Cable
P100200KIT Paralleling Cable
200K