Inspection And Maintenance - White Rhino Surf Shack Instrucciones Generales

- all provisions and instructions in the enclosed manual
have been closely followed;
- there is no question of inadequate, improper or
incorrect use of a White Rhino product;
- no part or accessory has been replaced.
The purchaser must invoke this guarantee within
30 days of the date of purchase or, if the defect was
hidden, within 30 days of its discovery or when it
should reasonably have been discovered.
If the purchaser justifiably invokes this guarantee, he
will be offered an identical or similar product or part
within a reasonable period by way of replacement
or repair, according to circumstances. However, the
vendor may at any time pay the purchaser an amount
equal to the retail price of the product instead of
replacing the product or part.
Under no circumstances can the manufacturer be held
liable for other compensation for loss of enjoyment or
indirect damage.

INSPECTION AND MAINTENANCE

The frequency of inspection and maintenance will
vary with the type of equipment or materials used
or other factors (e.g. heavy use, levels of vandalism,
coastal location, air pollution, age of equipment,
...). The frequency of the inspection checks should
be increased according to the occurrence of special
factors.
During regular inspection checks, the following aspects
should be considered
Check the surroundings of the White Rhino
construction. Make sure no hard or dangerous objects
are lying around, and check the shock-absorbing effect
of the ground.
Check wooden parts for splinters and structural
damage.
Bolt and nut connections can work loose over time. If
necessary tighten, but make sure that the wood does
not split or splinter.
Check metal parts such as corner joints and swing
hooks for wear and rust which could adversely affect
strength. If in doubt, replace. Moving metal parts must
be lubricated regularly.
In case of cracks or fractures in parts or connectors of
accessories such as swings and the like, this product
must immediately be removed from the equipment.
Should one of the constructions be found to be
incomplete or damaged, until the damage is repaired,
the construction should be excluded from use by the
playground users.
Routine visual inspection should be executed weekly
to monthly
- Always check that the bolts and nuts are securely
fastened.
- Check the shock absorbing surface for objects that
don't belong there.
- Check for missing parts.
- Check the equipment ground clearances.
Operational inspection should be executed every 1 to
3 months
- Check the stability of the construction.
- Check every part for excessive wear and replace
when necessary.
Annual inspection should be executed 1 to 2 times per
year
- Check for rust and corrosion.
- Check every part for excessive wear and replace
when necessary.
3